electric vibrators

HZ VB Series electric vibrators line 3-Phase 2-Pole Rotary Electric Vibrators feature forces ranging from 110 Lbs to 8,800 Lbs at frequency of 3600 RPM.
The delivery service is responsible for damage occurring in transit. Martin Engineering CANNOT enter claims for damages. Contact your transportation agent for more
information.
1. Inspect shipping container/pallet for damage. Report damage to delivery service immediately and fill out delivery service’s claim form. Keep any damaged goods subject to examination.
2. Remove  electric vibrator from shipping container/pallet.
3. If anything is missing contact Martin Engineering or a representative.Turn off and lock out/tag out all energy sources to conveyor/loading systems to mounting structure.
4. Before installing electric vibrator, turn off and lock out/tag out all energy sources to conveyor/loading systems to mounting structure according to ANSI standards.
If equipment will be installed in an enclosed area, gas level or dust content must be tested before using a cutting torch or welding. Using a cutting torch or welding in an area with gas or dust may cause an explosion.
5. If using a cutting torch or welding, test atmosphere for gas level or dust content.
6. Mounting surface must be strong and flat, 0.01 in. (0.25 mm) across electric vibratorfeet. (This will minimize internal stress to vibrator casting when tightening mount bolts. Welding in the area of the mounting surface could affect its flatness.)
7. Make sure mounting surface is free of paint and debris and foot of  electric vibrator is clean.