VB Series electric vibrator

VB Series electric vibrators are designed and manufactured to ensure the best
performance and reliability in severe-duty applications. VB Series electric vibrators
has a recommended operational ambient temperature and mounting surface
temperature range of -22 to 104°F (-30 to 40°C). If operating the motor in
environments beyond these temperatures, as the VB Series electric vibrators may require rating reduction, more frequent lubrication, or lubrication substitution.
This manual provides instructions for installation onto steel bins and hoppers
only. For installation onto other structures, a representative.
References of VB Series electric vibrators
The following documents are referenced in this manual:
•The National Electrical Code (NEC), National Fire Protection Association,1 Batterymarch Park, P.O. Box 9101, Quincy MA 02269-9101.
• American National Standards Institute (ANSI) z244.1-1982,American National Standard for Personnel Protection - Lockout/Tagout of Energy Sources - Minimum Safety Requirements, American National Standards Institute, Inc., 1430 Broadway, New York, NY 10018.
• Code of Federal Regulation (CFR) 29, Part 1910,Control of Hazardous
Energy Source (Lockout/Tagout); Final Rule, Department of Labor,Occupational Safety and Health Administration (OSHA), 32nd Floor, Room 3244, 230 South Dearborn Street, Chicago, IL 60604.
• CFR 29, Part 1910.15,Occupational Noise Exposure, Department of Labor,OSHA, 32nd Floor, Room 3244, 230 South Dearborn Street,Chicago, IL 60604.
Safety
All safety rules defined in the above documents and all owner/employer safety
rules must be strictly followed when working on the vibrator.
Materials required In addition to hand tools, the following materials are required to install this equipment:
• Mounting plate and channel assembly , P/N 32401-B2.

Storage
Store VB Series electric vibrators in an ambient temperature not less than 41°F (5°C) with a relative humidity not more than 60%. If the vibrator has been stored for 2 or more years, remove bearings, wash them, and repack them with new grease.